Description CISCO 1941 /K9 – Cisco ISR G2 1900 Series Router The CISCO 1941 /K9 – Cisco ISR G2 1900 Series Router from Cisco is designed to consolidate the functions of separate devices into a single, compact system that can be remotely managed, and supports a wide range of wireless and wired connectivity options such as T1/E1, xDSL, 3G, 4G LTE, and GE. It offers embedded hardware encryption acceleration, optional firewall, intrusion prevention, and application services. The Integrated Services Routers Generation 2 (ISR G2) routers provide service integration and agility. Designed for scalability, the modular architecture of these platforms enables you to grow and adapt with your business needs. The Cisco 1941 Series is architected to meet the application demands of branch offices with design flexibility for future applications. The modular architecture is designed to support customer requirements, increased bandwidth, and integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE) and Cisco Enhanced PoE (ePoE).The Cisco 1941 provides enhanced modular capabilities offering investment protection for customers. Modules available on previous generations of Cisco routers, such as the Cisco 1841 ISR, are supported on the Cisco 1941. Additionally, modules used on the Cisco 1941 can easily be interchanged with other Cisco routers to provide maximum investment protection. With the help of common interface cards across a network, reduces the complexity of managing inventory requirements, implementing large network rollouts, and maintaining configurations across a variety of branch-office sizes.The Cisco 1941 Series provides the ability to host Cisco, 3rd party, and custom applications on Cisco Services Ready Engine (SRE) module that seamlessly integrates into the router. The module has its own processor, network interface, and memory that operate independently of the host router resources, helping to ensure maximum concurrent routing and application performance while reducing physical space requirements, lowering power consumption, and consolidating management. Services/Slot Density USB 2 x External USB flash memory slots (type A) 1 x USB console port (type B) (up to 115.2 kb/s) Memory DDR2 ECC DRAM Memory: Default 512 MB DDR2 ECC DRAM Memory: Maximum 2 GB Compact Flash (External)-Default : Slot 0: 256 MB Compact Flash (External)-Maximum : Slot 0: 4 GB Slot 1: 4 GB Ports 2 x Total onboard Gigabit Ethernet 10/100/1000 WAN 2 x RJ-45 1 x Serial console (up to 115.2 kb/s) 1 x Serial auxiliary (up to 115.2 kb/s) Slots 2 x EHWIC 1 x Double-wide EHWIC (Use of a double-wide EHWIC slot will consume two EHWIC slots) 1 x ISM Acceleration Embedded hardware-based crypto acceleration (IPSec): Yes Power Specifications Power Supply AC, PoE Typical Power (No Modules): 35 W AC Input Voltage: 100 to 240 V Frequency: 47 to 63 Hz Current Range AC Power Supply (Maximum): 1.5 to 0.6 A Surge Current:<50 A Power Capacity AC Power Supply: 110 W PoE Power Supply (Platform Only): 110 W PoE Device with PoE Power Supply: 80 W Environmental Operating Conditions Temperature 5906′ (1800 m) Maximum Altitude: 32 to 104˚F (0 to 40˚C) Temperature 9843′ (3000 m) Maximum Altitude: 32 to 77˚F (0 to 25˚C) Altitude: 10000′ (3000 m) Relative Humidity: 10 to 85% Acoustic: Sound Pressure (Typ/Maximum) 26/46 dBA Acoustic: Sound Power (Typ/Maximum) 36/55 dBA Storage Conditions Temperature: -40 to 158˚F (-40 to 70˚C) Relative Humidity: 5 to 95% Altitude: 15000′ (4570 m) Regulatory Compliance Safety UL 60950-1 CAN/CSA C22.2 No. 60950-1 EN 60950-1 AS/NZS 60950-1 IEC 60950-1 EMC 47 CFR, Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI V-3 CNS 13438 EN 300-386 EN 61000 (Immunity) EN 55024, CISPR 24 EN50082-1 Telecom Standards TIA/EIA/IS-968 CS-03 ANSI T1.101 ITU-T G.823, G.824 IEEE 802.3 RTTE Directive Physical Specifications General Rack Height: 2 RU Rackmount EIA: 19″ (48.3 cm) included Wallmount: Yes Note: refer to installation guide for approved orientation Airflow: Front to side Dimensions (W x H x D) 13.5 x 3.5 x 11.5″ (34.2 x 8.8 x 29.2 cm) Weight AC Power Supply (No Modules): 12.0 lb (5.4 kg) POE Power Supply (No Modules): 12.8 lb (5.8 kg) Maximum Weight – Fully Configured: 14.0 lb (6.3 kg) Packaging Info Package Weight 16.0 lb Box Dimensions (LxWxH) 19.65 x 16.0 x 9.0″
